5925-01-583-6550, CIRCUIT BREAKER

5925-01-583-7063 INTERRUPTER,GROUND FAULT

National Stock Number:
5925-01-583-6550

Federal Supply Class:
5925

National Item Identification Number:
015836550

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

APGN-66-28039-1

81349

MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE TWO
AUXILIARY TRIP COIL VOLTAGE TYPE AND RATING IN VOLTS	115.0 AC NOMINAL FIRST LOCATION
BODY LENGTH	2.000 INCHES NOMINAL
BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE
BODY WIDTH	2.250 INCHES NOMINAL
BUSHING LENGTH	0.625 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.530 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.750 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
FREQUENCY IN HERTZ	50.0 OR 60.0 ALL LOCATIONS
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	SHOCK RESISTANT AND VIBRATION RESISTANT AND SALT SPRAY PROOF AND MOISTURE RESISTANT
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP THIRD LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
MATERIAL	PLASTIC CASE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	20.0 AMPERES AC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	3500.0 AC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING W/PANEL SEAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.232 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.500 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC ALL LOCATIONS
POLE QUANTITY	3
RESET METHOD	MANUAL
SPECIAL FEATURES	RELAY COIL AT POLE ONE IS INSTANEOUS TRIP
TERMINAL TYPE AND QUANTITY	8 TAB W/SCREW
THREAD QUANTITY PER INCH	32
THREAD PITCH DIAMETERS	+0.4752 TO 0.4787 INCHES
THREAD SERIES DESIGNATOR	UN
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.150 MINIMUM AT 200 PCT AND 3.000 MAXIMUM AT 200 PCT ALL LOCATIONS
TRIP RELEASE DUTY CYCLE	CONTINUOUS FIRST LOCATION
TRIP RELEASE CHARACTERISTIC	INSTANTANEOUS ALL LOCATIONS
TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 ALL LOCATIONS

Click here to Register for Free 30-day Trial