| MATERIAL | STEEL |
| TEETH HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND |
| 38.0 ROCKWELL C MAXIMUM |
| SHAFT HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND |
| 38.0 ROCKWELL C MAXIMUM |
| SURFACE TREATMENT | PHOSPHATE |
| WORM THREAD QUANTITY | 1 |
| WORM PRESSURE ANGLE IN DEG | 14.500 |
| WORM THREAD LEAD | 0.066 INCHES NOMINAL |
| WORM THREAD DIRECTION | RIGHT-HAND |
| WORM HELIX ANGLE | 3 DEG 34 MIN |
| WORM OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
| WORM PITCH DIAMETER | 0.335 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| END SIMILARITY | NOT IDENTICAL |
| STRAIGHT UNTHREADED LENGTH | 0.430 INCHES NOMINAL FIRST END |
| 0.760 INCHES NOMINAL SECOND END |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.351 INCHES NOMINAL FIRST END |
| 0.270 INCHES NOMINAL SECOND END |
| UNTHREADED SECTION PIN HOLE DIAMETER | 0.0960 INCHES NOMINAL FIRST END, FIRST PORTION |
| 0.0400 INCHES NOMINAL SECOND END, FIRST PORTION |
| OVERALL LENGTH | 1.960 INCHES NOMINAL |
| SPECIAL FEATURES | THREE 0.096 IN. DIA MOUNTING HOLES SPACED 120 DEG APART ON FIRST END AND FOUR 0.040 IN. DIA MOUNTING HOLES SPACED 0.330 IN. C TO C ON SECOND END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 70210 |
| DESIGN CONTROL REFERENCE | 531867-4 |